排序方式： 共有61条查询结果，搜索用时 31 毫秒
1.
近年来激光剥蚀电感耦合等离子体质谱(LA-ICP-MS)应用于单个流体包裹体成分定量分析已成为研究流体包裹体的最佳手段之一。该实验过程和数据处理比较复杂,目前国内外采用的数据分析软件为一款基于MATLAB的SILLS软件,该软件主要是对矿物(锆石)、流体包裹体以及熔体包裹体LA-ICP-MS分析结果进行处理。本文以萤石流体包裹体LA-ICP-MS分析为例,阐述了样品制备与流体包裹体的优选方法,对流体包裹体片厚度以及单个流体包裹体的选取要求作了详细描述,对仪器参数设置、内外标样选取和剥蚀方法等进行了说明。基于SILLS软件采用尖峰消除的方法对待处理数据进行校正,对不同种类型的波峰进行峰宽的选取。在元素比值校正和等效盐度计算过程中,由于被测样品是萤石,Ca元素具有较高的背景值,选择以Na作为流体包裹体的内标元素,以Ca作为寄主矿物的内标元素对寄主矿物浓度进行计算,同时提出以电价平衡代替质量平衡进行等效盐度计算。以上方案提高了LA-ICP-MS分析单个萤石流体包裹体的准确性,有助于解释成矿流体来源和矿床成因等问题。 相似文献
2.
北山造山带中部(甘肃段)花岗岩成因及构造背景 总被引：2，自引：2，他引：0
北山造山带中部花岗岩体以陶勒努图洪岩体和跃进山南岩体为代表,本文对这两个岩体进行了LA-ICP-MS锆石U-Pb定年、全岩地球化学和原位锆石Lu-Hf同位素分析,结果表明:岩体成岩年龄分别为410±2. 8Ma、427±2. 5Ma;主量元素呈现高硅、高钾钙碱性、准铝质-弱过铝质特征;微量元素表现为富集Th、Zr、Hf等及大离子亲石元素(Rb、U、K等),亏损Ba、Sr、Eu及高场强元素(Nb、Ta、P、Ti等);球粒陨石标准化稀土元素曲线呈轻稀土富集、重稀土亏损的右倾模式。综合分析认为跃进山南岩体属A型花岗岩,陶勒努图洪岩体属S型花岗岩。陶勒努图洪和跃进山岩体锆石ε_(Hf)(t)分别为-2. 90～-0. 12(平均值为-1. 53)、-1. 99～2. 82(平均值为0. 26),t_(DM2)分别为1. 41～1. 58Ga、1. 23～1. 54Ga。研究表明:陶勒努图洪黑云母花岗闪长岩岩浆源区主要为由元古界北山杂岩组成的以变质杂砂岩为主的古老地壳物质(含中基性岩石)部分熔融的产物,跃进山南二长花岗岩体可能在元古界北山杂岩组成的以变质杂砂岩为主的古老地壳物质重熔过程中有幔源岩浆的参与。在中志留世(427Ma)明水-小黄山洋已向南侧马鬃山-公婆泉弧之下俯冲至后期,板块后撤引发明水-旱山地体南缘弧后形成裂解环境导致幔源岩浆底侵,诱发地壳物质重熔形成花岗质岩浆,岩浆侵位形成跃进山南二长花岗岩体;至早泥盆世(410Ma),俯冲结束发生弧-陆碰撞造山导致地壳增厚,引发下地壳发生部分熔融产生的花岗质岩浆侵位形成陶勒努图洪岩体;两岩体是在早、晚古生代交接时段同一俯冲-碰撞构造背景下不同部位、不同亚构造环境下的产物。 相似文献
3.
二叠-三叠纪之交华南地区普遍发育火山成因的粘土岩,其对于了解二叠纪末大规模火山活动及扬子板块碎屑物质来源具有重要意义。本文对扬子西缘马角坝刺林包剖面飞仙关组底部粘土岩进行了碎屑锆石U-Pb定年及原位Hf同位素测试、X衍射和全岩地球化学分析,以揭示粘土岩的岩石成分及物源信息。镜下特征、X衍射及主量元素特征表明岩石中粘土矿物主要为伊利石,含少量方解石、石英。碎屑锆石年龄显示,特征峰值年龄主要集中在2 615~2 383、1 868~1 328、1 186~778和430~246 Ma,并出现~250 Ma特征高峰,结合原位Hf同位素特征表明锆石与秦岭造山带、华南典型PTB剖面粘土岩及峨眉山大火成岩省具有较高的相似性。同时,通过微量、稀土元素分析发现粘土岩中Zr、Hf、Th、Cr、Co、Ti相对富集,与华南典型PTB粘土岩和峨眉山玄武岩相近,并结合构造背景及锆石特征,综合认为刺林包剖面PTB粘土岩来自于秦岭造山带及龙门山岛链局部剥蚀区、二叠纪末火山活动和峨眉山大火成岩省剥蚀岩体。 相似文献
4.
LANG Xinghai LIU Dong DENG Yulin TANG Juxing XIE Fuwei YANG Zongyao CUI Zhiwei WANG Xuhui LI Zhijun ZHANG Zhong ZHANG Jinshu HUANG Yong 《《地质学报》英文版》2018,92(1):420-421
正Objective Lhasa terrane has recorded the geologic history concerning the formation and evolution of Paleo-Tethys and the intra-continental convergence in Qinghai–Tibet Plateau(Yin and Harrison,2000).Previous investigations have focused on the initial timing of the India-Asia collision and the Cretaceous–Cenozoic magmatism and sedimentation(Wang Tianyang et al.,2017),however, 相似文献
5.
3D打印(3D printing)是一种以三维模型为样本的快速成形技术,它通过逐层打印或粉末熔铸的方式来构造需要的立体图形。本文从3D打印技术的原理及其发展现状入手,重点列举内蒙古乌力吉敖包萤石矿,利用3D打印机打印具有现实可观性的地质体实体,探讨3D打印技术作为新兴的科技手段应用于矿床学教学与研究的应用价值和发展前景。研究发现,3D打印技术在矿体三维可视化中的应用符合地质图件立体化和3D打印技术多领域化的趋势,未来3D打印技术在地质领域的应用也有助于开拓矿床学教学和研究的新方式与新思路。 相似文献
6.
西藏冈底斯南缘汤白矿区早侏罗世含矿斑岩锆石U-Pb定年及其地质意义 总被引：1，自引：0，他引：1
汤白矿区位于西藏冈底斯斑岩铜矿带西段南缘,南侧紧邻日喀则弧前盆地。矿区由地表探矿工程控制3条赋存于早侏罗世角闪石英闪长斑岩中的主矿体(1号、2号和3号),在野外地质调查的基础上,对角闪石英闪长斑岩进行LA-ICP-MS锆石U-Pb定年和岩石地球化学测试。研究结果表明:(1)含矿斑岩的成岩年龄为183.3±1.2Ma,形成于早侏罗世;(2)含矿斑岩地球化学特征与大洋岛弧背景下的安山质岩石的地球化学性质一致,表明汤白矿区含矿斑岩形成于大洋岛弧环境;(3)西藏冈底斯斑岩铜矿带具有寻找俯冲期斑岩型矿床的巨大潜力,今后应加强该带俯冲期斑岩型矿床的勘查评价工作,特别是早—中侏罗世斑岩的成矿潜力评价。 相似文献
7.
西藏拉萨地块南缘雄村矿集区首次发现早石炭世辉长岩:古特提斯洋的残留? 总被引：1，自引：0，他引：1
拉萨地块是研究特提斯洋形成演化和青藏高原陆内汇聚作用的关键地区,前人对拉萨地块中新生代构造演化过程进行了大量的研究,而对于古生代演化阶段研究较为薄弱。本文以拉萨地块南缘雄村矿集区新发现的辉长岩为研究对象,对雄村辉长岩进行锆石LA-ICP-MS U-Pb定年,探讨其反映的构造意义。雄村辉长岩中锆石LA-ICP-MS U-Pb年龄为(341.55±0.89)Ma,表明其形成于早石炭世。结合区域地质演化过程,认为早石炭世雄村辉长岩可能是古特提斯洋的残留,新的年龄数据将为研究拉萨地块和特提斯洋的演化过程提供重要的约束。 相似文献
8.
The Duolong district in central Tibet hosts a number of porphyry as well as high sulfidation epithermal copper–gold deposits and prospects, associated with voluminous calc-alkaline volcanism and plutonism. In this study, we present new geochronological, geochemical, isotopic and mineralogical data for both economically mineralized and barren porphyritic intrusions from the Duobuza and Naruo porphyry Cu–Au deposits. Zircon U–Pb analyses suggest the emplacement of economically mineralized granodiorite porphyry and barren granodiorite porphyry at Naruo deposit took place at 119.8 ± 1.4 Ma and 117.2 ± 0.5 Ma, respectively. Four molybdenite samples from the Naruo deposit yield an isochron Re–Os age of 119.5 ± 3.2 Ma, indicating mineralization occurred synchronously with the emplacement of the early granodiorite porphyry. At Duobuza deposit, the barren quartz diorite porphyry intruded at 119.5 ± 0.7 Ma, and two economically mineralized intrusions intruded at 118.5 ± 1.2 Ma (granodiorite porphyry) and 117.5 ± 1.2 Ma (quartz diorite porphyry), respectively. Petrographic investigations and geochemical data indicate that all of the porphyritic intrusions were oxidized, water rich, and subduction-related calc-alkaline magmas. Zircons from the porphyritic intrusions have a wide range in the εHf (0–11.1) indicating that they were sourced from mixing of mantle-derived mafic, and crust-derived felsic melts. Moreover, the variation of trace element content of plagioclase phenocrysts indicates that the magma chambers were recharged by mafic magmas.Comparison of the composition of amphibole phenocrysts indicates the porphyry copper–gold mineralization at Duolong was generated in magma chambers at low crystallization temperatures and pressures (754° to 791 °C, 59 M to 73 MPa, n = 8), and under highly oxidizing conditions (ΔNNO 2.2 to 2.7, n = 8). In contrast, barren intrusions were sourced from the magma chambers with higher crystallization temperatures and pressures (816° to 892 °C, 111 to 232 MPa, n = 22) that were less oxidizing (ΔNNO 0.6 to 1.6, n = 22). The requirement for a thermal contrast is supported by the declining of Ti content in magnetite crystals in barren intrusions (12,550 to 34,200 ppm) versus those from economically mineralized intrusions (600 to 3400 ppm). Moreover, the V content in magnetite crystals from economically mineralized intrusions (990 to 2510 ppm) is lower than those recorded from barren intrusions (2610 to 3510 ppm), which might reflect the variation in oxidation state of the magma. The calculated water solubility of the magma forming the economically mineralized intrusions (3.2–3.7 wt%) is lower than that of magma forming the barren intrusions (4.6–6.4 wt%). Based on the chemical–physical characteristics of economically mineralized magma, our study suggests that the development of porphyry Cu–Au mineralization at Duolong was initiated by shallow-level emplacement of a magma that crystallized at lower temperatures and pressures. Experimental studies show that copper and water solubilities in silicate melts decrease with falling temperatures and pressures, indicating metals and ore-forming fluids are more likely to be released from a magma reservoir emplaced at shallow crustal levels. We propose the magnetite might be a convenient exploration tool in the search for porphyry copper mineralization because the variations in Ti and V content of mineral concentrates and rock samples are indicative of barren versus mineralized intrusions. 相似文献
9.
The new antillocaprinid rudist bivalve Parasarcolites sohli sp. nov. is described from the Maastrichtian rocks of Puerto Rico (El Rayo Formation) and Jamaica (Sunderland Inlier). The species shows that all tubes, one of the diagnostic features of the genus, arise by the development of flanges on costae to roof over the intercostal space between adjacent costae. This is the first time that this feature has been unequivocally shown in an antillocaprinid rudist and suggests that tubes in other antillocaprinid rudists arose in a similar way. The species occurs in early Maastrichtian deposits of Puerto Rico and Jamaica, and represents a potential marker species in future biostratigraphic studies. 相似文献
10.
A complete thermal history for the Qulong porphyry Cu–Mo deposit, Tibet is presented. Zircon U–Pb geochronology indicates that the mineralization at Qulong resulted from brecciation-veining events associated with the emplacement of a series of intermediate-felsic intrusions. Combined with previously published ages, our results reveal a whole intrusive history of the Qulong composite pluton. Causative porphyries were emplaced at ~ 16.0 Ma as revealed by 40Ar–39Ar dating of hydrothermal biotite (15.7 ± 0.2 Ma) and sericite (15.7 ± 0.2 Ma). Zircon and apatite (U–Th)/He (ZHe and AHe) dating of Qulong revealed that both followed similar, monotonic thermal trajectories from 900 °C (U–Pb ages: 17.5–15.9 Ma) to 200 °C (ZHe: 15.7–14.0 Ma), and that the causative porphyries experienced faster cooling at a maximum rate of greater than 200 °C/myr. The Qulong deposit was exhumed between 13.6 Ma and 12.4 Ma (AHe) at an estimated rate of 0.16–0.24 mm/y, which is consistent with previous estimates for other Gangdese Miocene porphyry deposits. Our AHe thermochronology results suggest that neither the Gangdese thrust system, nor the Yadong–Gulu graben affected or accelerated exhumation at the Qulong deposit. 相似文献